Digital to Analog Converter and Stereo Amplifier - Model 250
Connect your speakers directly to your plasma/LED TV with Amphony's digital-to-analog converter / amplifier. The amplifier connects via SPDIF cable directly to any optical audio output. This amplifier combines a digital-to-analog converter with a high-grade power amplifier inside a tiny package no larger than a deck of cards.
This amplifier incorporates a high-quality digital-to-analog converter with a dynamic range of 112 dBA and accepts audio up to 24 bits and 192 kHz. The built-in state-of-the-art power amplifier delivers the energy efficiency of today's best digital class-D audio amplifiers while at the same time offering far lower audio distortion at only 0.04 %.
It's aluminium chassis itself provides enough cooling. No built-in fans or additional cooling are necessary.
State-of-the-art digital amplifier
The integrated energy-efficient amplifier provides 80 Watts of RMS power at a distortion of only 0.04 % for audiophile music playback. It's 112 dB signal-to-noise ratio allows for the most critical application. Due to the amplifier's high efficiency, no cooling is required and all you will hear is the music.
| Description | Specification |
|---|---|
| Output power | 2 x 40 W rms |
| Supported digital audio formats | Linear PCM (uncompressed) - SPDIF |
| Supported sampling rates | 32 kHz - 192 kHz |
| Supported digital word width | 16 to 24 Bits |
| Dynamic range / signal-to-noise ratio | 112 dBA |
| Frequency response | 1 Hz - 20 kHz @ SR > 32 kHz |
| Total harmonic distortion (THD+N) | 0.04 % @ 20 W, 1 kHz |
| Power efficiency | 93 % |
| Channel separation | 77 dB |
| Idle power consumption | < 3 W |
| Dimensions | 3-9/16 " (W) x 3-7/16 " (D) x 3/4 " (H) 91 mm (W) x 83 mm (D) x 31 mm (H) |
Model 250 Application:
